Free calculator

Pressure Washing Estimate Calculator

Type your own price per square foot for each surface and the size of each one. You get a line for every surface and the job total, with your minimum charge.

Your prices

Enter your rates per surface

Your own price per square foot for each surface. The calculator has no built-in rates, and a surface you leave blank is not priced. Setting your prices? Read how much to charge for pressure washing.

$/ sq ft
$/ sq ft
$/ sq ft
$/ sq ft
$/ sq ft
$

The least you take for a trip. The job total never goes under it.

The job

Type the length and width of each surface you are washing, or its square feet if you know them. Square feet win when both are filled in.

House wash

Walk the outside: the distance around the house times the wall height to the eaves.

Driveway
Sidewalk and patio

Add an L shape or a second patio as square feet.

Deck

The floor. Add stairs and railings as square feet, or set a higher deck rate.

Roof

Roof surface, not the footprint: the roofing square calculator turns a footprint and pitch into roof square feet.

Estimate

-

Fill in your rates and the job above.

Surfaces added up-
Job total-

Your rates and sizes stay in this browser. Nothing is sent.

Price a house wash, driveway and deck

Most pressure washing jobs are priced by the square foot, with a different rate for each surface: siding, flat concrete, wood and roofs take different time, pressure and chemicals. This calculator multiplies each surface's size by your rate for it and adds them up. It never fills in a rate for you. The right price depends on your area, your rig and how dirty the job is, and the pressure washing pricing guide walks through setting it.

Measure the house

For a house wash, walk around the outside and measure the distance around the house, then multiply by the wall height to the eaves. A 40 x 30 foot house is 140 feet around, and with 10 foot walls that is 1,400 square feet of siding. Most washers do not take off for windows and doors, since the crew still works around them.

Driveways, sidewalks and patios

Flat work is length times width. A 30 x 20 foot driveway is 600 square feet. Break an L-shaped drive into two rectangles, add them, and type the total in the square feet box. Measure sidewalks and a patio the same way and put their total on one line.

Decks and roofs

For a deck, measure the floor. Stairs and railings take extra time, so either add them as square feet or set a higher deck rate. For a roof, price the roof surface, not the footprint: a pitched roof is bigger than the ground it covers, and the roofing square calculator turns a footprint and pitch into roof square feet.

A worked example

To keep the math easy to follow, this example uses $1.00 per square foot on every surface. That is not a price to charge: type your own rates. A house 140 feet around with 10 foot walls is 1,400 square feet, which comes to $1,400.00. A 30 x 20 driveway is 600 square feet, $600.00. A 20 x 10 deck is 200 square feet, $200.00. The job comes to $2,200.00. Type the same numbers above and the calculator shows the same lines and total.

The minimum charge

Small jobs still cost a trip, setup and cleanup. A minimum charge is the least you take to show up. Using the same $1.00 example rate, say a 300 square foot patio comes to $300.00 and your minimum is $500.00: the estimate says $500.00, and the calculator tells you the minimum set the price.

Turn it into a written estimate

A number on a calculator is not an estimate yet. Put each surface on its own line with its size and price, so the customer sees what they are paying for and can add or drop a surface without another visit. Then write what is not included, such as rust or oil stain removal, how long the price is good for, and how they pay.

The pressure washing estimate template has those parts laid out. FastEstimateMaker builds the estimate from your own rates, sends it by text or email, and collects the signature and the deposit.

Common questions

Measure each surface in square feet, multiply it by your rate for that surface, and add the lines. Then check the total against your minimum charge. Siding, flat concrete, decks and roofs usually carry different rates because they take different time and chemicals.

Measure the distance around the house and multiply it by the wall height to the eaves. A house 140 feet around with 10 foot walls is 1,400 square feet. On a two-story house, use the full height to the upper eaves.

Because the right price is yours. Rates change with the area, the equipment, the condition of the surface and how much work you want. The calculator only does the math on the rates you type. For help setting them, read how much to charge for pressure washing.

Cover the trip, setup, cleanup and the time a small job still takes, then add your profit. If you know your hourly rate, a minimum of at least an hour or two of it is a common way to start. The hourly rate calculator works out that rate from your costs and the take-home you want.

Square foot pricing is easy to explain and easy to check, and it is how this calculator works. Many washers quote one price for the job once they know their numbers. The square foot math is still a good way to check that a flat price covers the work.

No. Nothing you type is transmitted or stored - the math runs in your browser. There is no account and no email.

More free contractor tools

Gallons, primer and a price

Paint Calculator

Walls less doors and windows, coats and primer to the gallons to buy, then a painting estimate at your own rates.

Bleach, water and surfactant

Soft Wash Mix Calculator

Batch mix and downstream injector tank strength for siding, roofs, concrete and decks.

A 30% markup is not a 30% margin

Markup vs Margin Calculator

Convert between the two, and find the markup that lands the margin you want.

What to charge per hour

Hourly Rate Calculator

Work back from the take-home you want, your overhead, and the hours you can actually bill.

Send the estimate before you leave the driveway

FastEstimateMaker turns your rates into a written pressure washing estimate in about a minute, sends it, and collects the signature and the deposit. Start free - no credit card required.

Build a real estimate free

Solo is $29.99/month with every office feature. Canvass is $59.99/month plus $19.99/month per rep seat.